vPedal Serial Port lnstallation

Step 1:

Plug your vPedal into an available serial port

Note: generally there are two serial ports on the back of your pc please take note of the number of the serial port you have plugged into.

Step 2:

Install Express Scribe

Click here to install (run from location)

Click on Options > Pedal and Hot Keys (as above)

Click on the Tab labelled Control (ensure that your settings match the above image)

For example: Use Foot Pedal Playback Control is ticked.

COM 1 ( Serial ) is selected and 3-Pedals is also selected.

( Note if you have plugged your pedal into COM port # 2 it is at this point you select it from the drop down menu labeled Port:)

Then click on the "Foot Pedal Control Setup Wizard" and the follow the dialog prompts

Congratulations!!

vPedal is now fully operational

 

A few Tips:)

If you want to set Auto - Back space (default is set to 0000)

Quick Tap ~ Reset to play audio at normal speed

Pls note that support for the Serial Ports is very limited ~ it is acknowledged as part of the"Legacy Ports" on a PC so many of the vPedal Plug-ins don't work